MIDI-KASTOR hyd - stump grinder for excavators up 5 to 13 t | SEPPI M.

MIDI-KASTOR hyd

stump grinder for excavators from 5 to 15 t 150-350 bar | 60-180 l/min [2175-5076 psi |15.8-47.5 gpm]

  • To fit on a hydraulic excavator arm
  • Grinds stumps of any diameter as deep as 30 cm [12”] below the surface
  • Forms trenches to lay cables
Stump grinder for small and medium excavators
Stump grinder for small and medium excavators
Fresaceppi per escavatori, fresa legna fino 50 cm di diametro
An einem Baggerarm KASTOR hyd  raest Holz bis zu 50 cm DM
Eliminar cepas hasta 50 cm de profundidad y de todo diámetro
Pour l’application sur le bras hydraulique d’une pelle
Eliminar cepas hasta 50 cm de profundidad y de todo diámetro
Stump grinder for small and medium excavators
Fraise jusqu’à une profondeur de 30 cm
Fresa para cepas para excavadoras de 5 a 15 t
Grinds stumps as deep as 30 cm [12”] below the surface
Fraise de souches pour pelles de 5 à 15 t

The smaller version of SEPPI stump grinder KASTOR hyd is the MIDI-KASTOR hyd - a stump grinder for small and medium excavators.

SEPPI MIDI-KASTOR hyd grinds the stumps as deep as 30 cm [12 inch] below the ground. Any stump diameter can be eradicated, by swinging the excavator arm from one to the other side. The result is a fine mulch that may be easily incorporated into the soil and mixed with the ground, which fosters a fast decomposition. The stump has been removed completey, the soil is ready for new planting. The Rotor disc is equipped with very aggressive HRC-tooths. The specially developed angle of cut allows an ideal use of power.

Rotor disc width: 10 cm [4"], diameter 60 cm

APPLICATIONS:
  • Grinds stumps to clear streets, parks and other open spaces
  • Forms trenches to lay cables
MIDI-KASTOR hyd - STANDARD VERSION:
  • To fit on a hydraulic excavator arm
  • Grinds stumps as deep as 30 cm [12”] below the surface and any diameter
  • For excavators up 5 to 15 tons [11-30k lb]
  • Rotor: fixed tungsten tips tooths HRC
  • Any side shift, moved by excavator arm
  • Interface plate (universal for different kind of excavator attachments)
  • Prepared for transmission with hydraulic motor of choice
  • Single transmission
  • 5 belts
  • Protection with double chains / rubber
  • Colours: red RAL3020 · charcoal RAL7021
OPTIONS
  • Hyd. motor with relief valves of choice
  • Individual interface plate for excavator arm
  • 190° hydraulic rotation plate

​And other options of choice.

CARBIDE
CARBIDE

 
8880 Bekett Road
West Chester, OH 45011
T +1 513-443-6339