S7 drago - mulcher with collection into trailer - SEPPI M. S.p.A.

S7 drago

mulcher with collection into trailer 60-120 HP

  • Would you like to gather the mulch in your orchard? This is the right dragon!
  • Mulches grass and prunings up to 7 cm [2.8”] Ø
Slide background
Slide background
Slide background
Slide background
Slide background
Slide background
Slide background

Universal powerful SEPPI M. flail mulcher with a chute for collecting the mulching material.

The mulched material is taken up the chute and can then be collected and carted away in a trailer, leaving the soil clear of material. The S7 drago mulches grass and prunings up to 7 cm [2.8”] Ø from the floor for further use. Various materials, leaves and biodegradable waste can be mulched and collected. Helical distributed and high resistent SMO flails for universal use are for high cutting quality at uniformly distributed power. S7 drago casing is very resistent, made of high-tensile steel S420. Counterknives inside the casing will give a perfect result when mulching. Support roller with double tapered roller bearings unit for a long life and the low maintenance costs. Adjustable large diameter roller positioned close to the rotor improves mulching on uneven ground and prevents scalping.

The optimum aerodynamics and airflow and high suction effect of SMO hammers offer a perfect ejection of mulched material by ejection chute into the collecting trailer. The S7 drago mulcher works at speed of 3-10 km/h.

The S7 Drago collection mulcher can be used everywhere where the mulched material (grass, wood, leaves, biomass, cow dung, horse paddocks, ...) should be removed from the surface.

Available working width: 150, 200 cm [59", 79"].

  • Collection of material in orchards or vineyards
  • Clearing of site for replanting
  • Collection of biomass for composting
  • Environmental clearing in urban areas
  • Clearing of horse and cow dung
  • Mulches grass and prunings up to 7 cm [2.8”] Ø
  • Rotor with SMO flails
  • With chute for material collection into trailer
  • Hydraulically adjustable shute
  • Working speed 3-10 km/h
  • ISO 3-point rear linkage cat. 2 central fixed
  • Gearbox 540 rpm with freewheel
  • Input shaft 1 3/8” Z=6
  • Draw bar
  • Support roller
  • Front and rear protection: chains
  • Colour: red RAL 3020
  • PTO drive shaft
  • 1000 rpm gearbox
  • Hyd. sweeper XAN with 3 vanes
  • Trailer 1,5 m3 [91,540 inch3]
Zona Artigianale, 1
T 0471 963 550
F 0471 962 547

This website uses cookies. By continuing to use the website, you consent to the use of cookies.